Protection that works together
Perimeter detection, gates, bollards, and turnstiles — integrated with your access control and video systems for true defense in depth. Every layer communicates, so your perimeter responds as one coordinated system.
A complete perimeter, engineered as one
No single product secures a perimeter. We design and integrate the right combination of detection, barriers, and entry control — then connect them to your access and video platforms so the whole system works together.
Perimeter intrusion detection
Fence-mounted, buried-cable, and video-analytic sensors detect a breach the moment it happens and pinpoint exactly where.
Vehicle barriers & bollards
Crash-rated bollards, wedges, and beam barriers stop hostile or accidental vehicle incursions cold at your most exposed points.
Automated gates & operators
Swing, slide, and retractable gates with reliable operators control vehicle access without slowing legitimate traffic.
Turnstiles & speed gates
Optical turnstiles and speed gates manage pedestrian flow and stop tailgating — without creating a bottleneck at the door.
Security fencing & walls
Anti-climb, anti-cut, and crash-rated fence lines define and harden the boundary as the first physical line of defense.
Unified access & video
Every barrier ties into your access control and cameras, so a single event triggers one coordinated, auditable response.
True defense in depth
When detection, barriers, and entry control are integrated with your access and video systems, a single event sets off a coordinated response — an alert is verified on camera, an entry is locked down, and your team has the full picture in one place. That is the difference between scattered devices and a real security system.
- Vendor-neutral design — we specify the best product for each layer
- Open integration with leading access control and VMS platforms
- Installed and supported by factory-trained, certified technicians
The barrier that disappears into the ground
One example of the barriers we engineer into a perimeter: a retractable in-ground gate that delivers uncompromising protection, then vanishes completely when you need open, unobstructed access. A counterweighted panel rises from a sealed concrete vault to secure your line and lowers out of sight in seconds — no swing arc, no sliding track.
Invisible when open
The barrier lowers fully into a sealed in-ground vault, leaving a clean, unobstructed opening with no visual clutter.
Modular by design
Engineered in sections to fit virtually any span, from a single driveway to a wide vehicle entrance.
Design options
A range of finishes and picket profiles lets the system match the architecture of the property it protects.
Slope-ready installation
Adapts to uneven and sloped terrain where traditional swing and slide gates struggle.
All-weather operation
Sealed against sand, dust, and debris, with no exposed track to clear of snow or ice.
Manual override
Raises and lowers manually during a power loss, so access is never dependent on the grid.
How it works
A counterweighted panel of vertical pickets is housed in a sealed concrete vault below grade. On command, the panel rises to form a solid, anti-climb barrier across the opening; to grant access, it lowers back into the vault until the surface is flush and clear. The mechanism is integrated with your access control, so the same credential, schedule, or alarm event that governs your doors can raise or lower the perimeter.
- Anti-climb solid panel when raised — flush and invisible when lowered
- Sealed vault keeps the mechanism free of sand, dust, and debris
- Ties into access control and video for one coordinated response
See it in action
Watch the retractable in-ground barrier raise and lower in real installations.
Let's design the security your organization deserves
Schedule a free assessment with our team. We'll evaluate your sites, identify risks, and outline a clear plan — with no obligation.